Introducing · Batch 01 of 400
Morrow One
A dual-boiler espresso machine with the soul of a lever classic and the precision of a lab instrument.
- Brew pressure9.0bar
- Brew water93.0°C
- A classic shot27s
01 Design
Folded from a single sheet of steel.
A seamless 2 mm stainless shell with no visible screws, set on a cast plinth and framed by hand-oiled walnut. It looks calm on the counter and stays that way for decades.
- 2 mmstainless shell
- 0visible screws
- 34 cmwide footprint
02 Pressure
Nine bars. Exactly.
9.0bar at the group
A rotary pump under closed-loop control holds pressure within a tenth of a bar, then lets you profile it: a gentle pre-infusion, a nine-bar peak, a slow decline.
Play the three pressure profiles03 The workshop
One bench in Portland. One builder per machine.
Every Morrow One is assembled start to finish by one person, tested for 200 shots and signed inside the side panel. Eleven of us design, build, test and repair them under one roof.
Build sheetMorrow One · Batch 01
- Machine
- No. 001 to 400
- Shell
- Folded 20 miles away
- Walnut
- An Oregon mill, oiled by hand
- Assembly
- One person, start to finish
- Test
- 200 shots before it ships
- Signed
- Inside the left side panel
04 Heat
Two boilers. No waiting.
93.0°C brew water, ±0.2
A 0.8 L brew boiler holds extraction within two tenths of a degree while a separate 1.8 L steam boiler stays ready. Pull a shot and steam milk at the same time, from cold to ready in eight minutes.
Inside the machine05 Extraction
A 27-second ritual.
27seconds, timed on the front panel
Lift the lever and the E61-style group pre-infuses the puck before full pressure arrives. The shot timer starts by itself, so every cup is repeatable.
Pull a shot in the brew simulator06 Milk
Steam that never runs dry.
1.5 bar of dry steam through a cool-touch, four-hole tip. Silky microfoam for one flat white or six cappuccinos in a row.
- 1.8 Lsteam boiler
- 1.5 barsteam pressure
07 In use
Six flat whites in a row. Then six more.
Before the first batch, four cafés ran pre-production machines through nine months of morning rushes, beside 58 home baristas. The steam boiler never once ran dry.
Read the beta reviews
09 At a glance
Everything inside, nothing extra.
Every part you touch has one job. The numbered points on the machine match the numbered rows of the sheet.
- Boilers
- 0.8 L brew, 1.8 L steam, stainless
- Pump
- Rotary, flow and pressure profiling
- Group
- E61-style, lever operated, 58 mm
- Temperature
- PID, 86–96 °C in 0.5 °C steps
- Warm-up
- 8 minutes, cold to ready
- Water
- 2.5 L tank or plumbed-in
- Size
- 34 × 42 × 39 cm, 21 kg
- Power
- 120 V, 1,600 W, eco standby
- Built to be repairedStandard parts, published service manual.
- Quiet by designRotary pump, under 52 dB at full pressure.
- In the boxPortafilter, single and double baskets, tamper, two cups.
“The first home machine I have used that feels designed rather than assembled.”
Crema Quarterly, beta review
Explore Morrow One
- 01The MachineDesign, pressure, heat and steam, explained part by part.
- 02SpecificationsEvery number, plus how dual boilers compare with the usual choices.
- 03FinishesBrushed steel, obsidian, sage and bone, all with walnut sides.
- 04Coffee GuideRecipes, pressure profiles and a calm first week of dialling in.
- 05Reviews & PressRated 4.9 by 58 home baristas after nine months of daily use.
- 06Support & FAQCare schedules, warranty, shipping and straight answers.
First batch · 400 machines
Reserve your Morrow One.
$1,890 $100 refundable deposit today
Deposits hold your place in the first batch, shipping February 2027. Change your finish or cancel any time before it ships.